BMGBN - 37 513GIL METAL PRETREATMENT, 0513GIL-123-A
- MSDS: BMGBN
- Manufacturer: VALSPAR CORP
- Product Name: 37 513GIL METAL PRETREATMENT, 0513GIL-123-A
- National Stock Number: 8010-00N024557
Product Identification
Product ID:37 513GIL METAL PRETREATMENT, 0513GIL-123-A
MSDS Date:03/17/1989
FSC:8010
NIIN:00N024557
MSDS Number: BMGBN
Responsible Party
MINNEAPOLIS, MN 55415
US
Emergency Phone: 800-228-5635
Info Phone: 612-332-7371
Cage: 13418
Contractor
Telephone: 612-332-7371/800-228-5635
Cage: 13418
Ingredients
TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (TALC)
CAS: 14807-96-6
RTECS: WW2710000
Fraction By Weight: 1%
OSHA PEL 2 MG/M3 RDUST
ACGIH TLV: 2 MG/M3 RDUST
CHROMIC ACID, ZINC SALT; (ZINC CHROMATE PIGMENT)
CAS: 13530-65-9
RTECS: GB3290000
Fraction By Weight: 10%
OSHA PEL 0.1 MG/M3 (CRO3),C
ACGIH TLV: 0.01MG/M3 (CR)
BUTYL ALCOHOL
CAS: 71-36-3
RTECS: EO1400000
Fraction By Weight: 20%
OSHA PEL 100 PPM
ACGIH TLV: S, C 50 PPM; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ISOPROPYL ALCOHOL
CAS: 67-63-0
RTECS: NT8050000
Fraction By Weight: 60%
OSHA PEL 400 PPM;500 PPM STEL
ACGIH TLV: 400 PPM;500 PPM STEL
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE:CAN BE ABSORBED THRU SKIN.
HARMFUL IF INHALED. MAY AFFECT BRAIN, NERVOUS SYSTEM, RESPIRATORY
SYSTEM, CAUSING DIZZINESS, HEADACHE, NAUSEA OR RESPIRATORY
IRRITATION. OVEREXP TO INGREDIENTS IN PROD UCT MAY CAUSE NOSE &
THROAT IRRITATION,EYE IRRITATION, SKIN IRRITATION, MUCOUS MEMBRANE
IRRITATION. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:ZINC CHROMATE: GROUP 1 (NTP, IARC).
Effects of Overexposure:HLTH HAZ:CHRONIC:CNTNS CHROMATES WHICH MAY
CAUSE CANCER. NOTICE:RPTS HAVE ASSOC RPTD & PRLNG OCCUPATIONAL
OVEREXP TO SOLVENTS WITH PERMANENT BRAIN & NERVOUS SYSTEM DAMAGE.
INTENTIONAL MISUSE BY DELIB CONC & INHALING CONTENTS MAY BE
HARMFUL/FATAL. CNTNS INGRED WHICH MAY CAUSE LIVER/KIDNEY DAMAGE,
HEARING LOSS.
Medical Cond Aggravated by Exposure:ANY RESPIRATORY OR SKIN CONDITION.
First Aid
First Aid:INHAL:REMOVE FROM EXPOSURE AREA. IF BREATHING HAS STOPPED,
USE MOUTH-TO-MOUTH RESUSCITATION & GET MED ATTN. EYE: FLUSH WITH
WATER FOR AT LEAST 15 MIN. SKIN: WASH WITH SOAP AND WATER. INGEST:
GET MD IM MED .
Fire Fighting
Flash Point Method:TCC
Flash Point:59.0F,15.0C
Lower Limits:1.0%
Upper Limits:12%
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM, AND/OR WATER
FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . CONTAINERS EXPOSED TO FIRE SHOULD BE KEPT
COOL WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:VENTILATE AREA. AVOID BREATHING OF VAPORS. USE
NIOSH/MSHA APPROVED SCBA OR AIRMASK FOR LG SPILLS IN CONFINED AREA.
ELIMINATE IGNITION SOURCES. REMOVE WITH INERT ABSORBENT AND
NON-SPARKING TOOLS. AVOID CONTACT WITH EYES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:CONTR SHOULD BE GROUND/BOND WHEN POUR.
AVOID FREE FALL OF LIQ IN EXCESS OF FEW IN. KEEP AWAY FROM
HEAT/SPARKS/OPEN FLAME. DO NOT STORE ABOVE 120F.
Other Precautions:KEEP CONTR CLSD WHEN NOT IN USE. BASED ON PROD FL PT
& VP SUITABLE STOR SHOULD BE PROVIDED I/A/W OSHA REGS 1910.106.
EMPTY CONTR MAY CNTN PROD RESIDUE, INCL FLAM/EXPLOS VAP. DO NOT
CUT/PUNCTURE/WELD O N OR NEAR CONTR. ALL LBL (SUPP DATA)
Exposure Controls
Respiratory Protection:WEAR NIOSH/MSHA APPROVED APPROP PROPERLY FITTED
RESP DURING & AFTER APPLICATN UNLESS AIR MONITORING VAP/MIST LEVELS
ARE BELOW APPLIC LIM. FOLLOW RESP MFR DIRECTIONS FOR RESPIRATOR
USE.
Ventilation:REQUIRED FOR SPRAY/IN CONFINED AREA. VENT EQUIP SHOULD BE
EXPLOS PROOF. ELIMINATE IGNIT SOURCES.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:USUAL CLOTHING FOR PAINTING OPERATIONS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
OTHER PREC:WARNINGS MUST BE OBSERVED UNTIL CONTAINER HAS BEEN CLEANED
OR RECONDITIONED.
Chemical Properties
Boiling Pt:B.P. Text:177F,81C
Vapor Pres:33.0@68F
Vapor Density:2.6
Spec Gravity:0.89
Evaporation Rate & Reference:1.7(BUTYL ACETATE=1)
Solubility in Water:YES
Appearance and Odor:NORMAL FOR A COATINGS PRODUCT.
Percent Volatiles by Volume:90.18
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:HALIDES, CARBON DIOXIDE/MONOXIDE,
METAL OXIDES.
Disposal
Waste Disposal Methods:DISPOSE IN CHEMICAL DISPOSAL AREA OR IN MANNER
THAT COMPLIES WITH LOCAL, STATE, AND FEDERAL REGULATIONS. DO NOT
INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.